Fabrication of Tailored Membranes with Special Surface Wettability Features for Highly Efficient Crude Oil-in-Water...

Treating oily wastewater streams such as produced water has a huge potential to resolve the issue of wastewater disposal and generate useful water for reuse. Among different techniques employed for oily wastewater (oil-in-water; O/W emulsion) treatment, membrane-based separation is advantageous owing to its lower energy consumption, recycling, ease of operation, and wider scope of tuning the active layer chemistry for enhanced performance. In line with the possibilities of enhancing the performance of the membranes for efficient O/W emulsion separation, the current work is designed to yield five different variants of polyaniline (PANI) active layers with special surface wettability features (superhyrophilic and underwater superoleophobic) on a ceramic alumina support. To achieve variants of PANI on ceramic alumina supports, emulsion polymerization was carried out, and different concentrations of initiator ammonium persulfate (APS) were applied to lead to PANI-A@Aluminum Oxide membrane, PANI-B@Aluminum Oxide membrane, PANI-C@Aluminum Oxide membrane, PANI-D@Aluminum Oxide membrane, and PANI-E@Aluminum Oxide membrane corresponding to 0.15, 0.25, 0.35, 0.5, and 1.0 M concentrations of initiator. The variation in initiator concentration resulted in different PANI growth patterns; hence, the resultant membranes showed different structural, physical, and performance features. Different characterization techniques including ¹H NMR, SEM, FE-TEM, AFM, water contact angle, XRD, EDX, and ATR-FTIR confirmed a more uniform and continuous growth of PANI (PANI-B) using a 0.25 M initiator concentration. The resultant PANI-B@Aluminum Oxide membrane showed an excellent surfactant stabilized crude O/W emulsion separation reaching >99% with a permeate flux of 2154 L m^-2 h^-1 (LMH) at 4 bar using a 100 ppm surfactant stabilized crude oil-in-water emulsion. The fouling and cleaning cycles revealed that the membrane can be reused with a 70% recovery of the initial permeate flux.