Enhancing gas chromatography-mass spectrometry resolution and pure analyte discovery using intra-chromatogram elution...

Chemometric decomposition methods like multivariate curve resolution-alternating least squares (MCR-ALS) are often employed in gas chromatography-mass spectrometry (GC-MS) to improve analyte identification and quantitation. However, these methods can perform poorly for analytes with a low chromatographic resolution (R_s) and a high degree of spectral contamination from noise and background interferences. Thus, we propose a novel computational algorithm, termed mzCompare, to improve analyte identification and quantitation when coupled to MCR-ALS. The mzCompare method utilizes an underlying requirement that the retention time and peak shape between mass channels (m/z) of the same analyte should be similar. By discovering the selective m/z for a given analyte in a chromatogram, a pure elution profile can be generated and used as an equality constraint in MCR-ALS. The performance of the mzCompare methodology is demonstrated with both experimental and simulated chromatograms. Experimentally, unresolved analytes with a R_s as low as 0.05 could be confidently identified with mzCompare assisted MCR-ALS. Furthermore, application of the mzCompare algorithm to a complex aerospace fuel resulted in the discovery of 335 analytes, a 44 % increase compared to conventional peak detection methods. GC-MS simulations of target-interferent analyte pairs demonstrated that the performance of MCR-ALS deteriorated below a R_s of ∼0.25. However, mzCompare assisted MCR-ALS showed excellent identification and acceptable quantitative accuracy at a R_s of ∼0.02. These results show that the mzCompare algorithm can help analysts overcome modeling ambiguities resulting from the chemometric multiplex disadvantage.