Catalytic flash pyrolysis for recovery of gasoline-range hydrocarbons from electric cable residue using a low-cost...

This investigation's novelty and objective reside in exploring catalytic flash pyrolysis of cross-linked polyethylene (XLPE) plastic residue in the presence of kaolin, with the perspective of achieving sustainable production of gasoline-range hydrocarbons. Through proximate analysis, thermogravimetric analysis, and heating value determination, this study also assessed the energy-related characteristics of cross-linked polyethylene plastic residue, revealing its potential as an energy source (44.58 MJ kg^-1) and suitable raw material for pyrolysis due to its low ash content and high volatile matter content. To understand the performance as a low-cost catalyst in the flash pyrolysis of cross-linked polyethylene plastic residue, natural kaolin was subjected to characterization through thermogravimetric analysis, X-ray diffractometry (XRD), Fourier transform infrared spectroscopy (FTIR), and X-ray fluorescence (XRF). Cross-linked polyethylene plastic residue was subjected to thermal and catalytic pyrolysis in an analytical microreactor coupled to gas chromatography-mass spectrometry (Py-GC/MS system), operating at 500 °C, to characterize the distribution and composition of volatile reaction products. The application of kaolin as a catalyst resulted in a decline of the relative concentration of hydrocarbons in the diesel range (C₈-C₂₄) from approximately 87 % to 28 %, and a reduction in lubricating oils (C₁₄-C₅₀) from about 70 % to 13 %, while concomitantly increasing the relative concentration of lighter hydrocarbons in the gasoline range (C₈-C₁₂) from around 28 % to 87 %. Therefore, catalytic flash pyrolysis offers the potential for converting this plastic waste into a new and abundant chemical source of gasoline-range hydrocarbons. This process can be deemed viable and sustainable for managing and valorizing cross-linked polyethylene plastic residue.