Related Experiment Video
Updated: Jun 23, 2025

Probing and Mapping Electrode Surfaces in Solid Oxide Fuel Cells
Published on: September 20, 2012
Sulfuric Acid Baking and Fe(III)-Cl--H2SO4 Leaching Behavior of Ni- and Cu-Containing Sulfide and Silicate Rich
Pingchao Ke1,2,3, Marja Rinne3, Taina Kalliomäki3
1The State Key Laboratory of Nuclear Resources and Environment, East China University of Technology, Nanchang 330000, China.
Abstract:
Ni- and Cu-rich concentrate from a new site in Suhanko, Finland, was investigated. Mineral phases identified included talc, chalcopyrite, kaolinite, and pyrrhotite with 3.2% Cu and 1.5% Ni, and the latter is associated with pyrrhotite. In addition, the concentrate contained the precious elements Pd (14.9 g/t), Ag (17.1 g/t), Pt (2.1 g/t), and Au (1.1 g/t). This concentrate was baked and leached using a Fe(III)-Cl--H2SO4 system. The results showed that the leaching efficiencies of Ni, Cu, and Si from raw concentrate were 60%, 40%, and 5%; however, those from baked concentrate were 96%, 60%, and below 0.1%, indicating that the baking process enhanced Ni and Cu extraction while simultaneously inhibiting the dissolution of Si, which was due to the baking process liberating the associated Ni and Cu by the oxidation of chalcopyrite and pyrrhotite and converting the acid-soluble silicate into an insoluble form. Sulfuric acid leaching solution with Fe(III) as oxidant and Cl- as lixiviant was shown to be effective at leaching Ni (97%), Cu (62%), and Ag (89%), while simultaneously enriching the PMs Pd, Pt, and Au in the residue.
More Related Videos
04:09Demonstrating the Simplicity and In Situ Temperature Monitoring of the Mechanochemical Synthesis of Metal Chalcogenides Suitable for Thermoelectrics
Published on: August 30, 2024
12:04Exfoliation of Egyptian Blue and Han Blue, Two Alkali Earth Copper Silicate-based Pigments
Published on: April 24, 2014
Related Concept Videos
Precipitation and Co-precipitation
Sample Preparation for Analysis: Advanced Techniques
Acid digestion with strong acids is commonly used to dissolve inorganic materials that are insoluble (do not dissolve) in water. This method can be useful for...
Preparation and Reactions of Sulfides
Washing, Drying, and Ignition of Precipitates
Extraction: Advanced Methods
Qualitative Analysis
For instance, group IV...