Comparative evaluation between Taguchi method and response surface method for optimization of electrocoagulation...

The presence of a large amount of organic and inorganic pollutants in dairy effluent is a substantial environmental issue. This study investigated electrocoagulation (EC) as a potential treatment method for dairy wastewater under different operating conditions, such as applied voltage (5-25 V), electrolysis time (30-90 min), and inter-electrode distance (1-2 cm) by using aluminum electrodes. This study focuses on achieving the maximum removal of BOD, COD, and nitrate in dairy effluents with the aforementioned operating conditions. The process was optimized using the response surface methodology (RSM) and Taguchi method. RSM method optimized the electrocoagulation operating conditions such as the voltage at 23.75 V, time of 90 min, and inter-electrode distance at 1.07 cm. This optimization achieved the maximum removal percentage of BOD, COD, and nitrate at 79.06%, 84.35%, and 79.64%, respectively, in dairy effluent. Taguchi method optimized the electrocoagulation parameters such as the voltage at 25 V, time duration of 90 min, and inter-electrode distance of 1.00 cm, showcasing improved removal percentages of BOD, COD, and nitrate as 90.54%, 89.28%, and 82.74% respectively. The current study attempts to understand the optimization efficiencies between Taguchi method and response surface method for diary wastewater treatment.