Experimental Study on Durability and Bond Properties of GFRP Resin Bolts

Glass fiber-reinforced polymer (GFRP) anchor bolts are a new type of high-performance nonmetallic anchor with significantly higher tensile strength, a lighter weight, better corrosion resistance, and a lower cost than steel bars. Therefore, exploring the durability and bonding performance of GFRP anchor systems is of great importance for the structural design of protective engineering, especially in coastal environments. However, insufficient research has been conducted on the durability of GFRP resin bolts in seawater conditions, with no universal standard on the pullout testing of GFRP bolts. To study the durability and bonding performance of GFRP resin bolts, durability experiments were conducted in this work using artificial seawater, and the pullout tests were conducted using a large-scale concrete platform with different compressive strengths (21.2, 40.8, and 61.3 MPa). The results of the durability experiments indicated that the strength variations of the GFRP rods and epoxy resin materials in artificial seawater environments were less than 5%. Subsequently, indoor pullout tests using steel tubes filled with epoxy resin were conducted, and the test results indicated a critical anchor length value. Pullout tests of the GFRP resin bolts embedded in large-scale concrete blocks were also conducted with different strengths. According to the test results, all GFRP resin bolts embedded in the three concrete blocks with different compressive strengths exhibited rod fracture failure. The failure mode was not controlled via the compressive strength of the concrete blocks due to the high bonding strength between the resin and the rod, as well as between the resin and the concrete. Therefore, this GFRP resin anchor system could fully utilize the tensile strength of GFRP rods. This research offers significant practical value in verifying the safety and reliability of GFRP resin bolts in corrosive marine service environments, and it contributes to the application and development of GFRP materials in the engineering field, serving as a valuable reference for the structural design and further study of GFRP bolts.