Steel Slag Accelerated Carbonation Curing for High-Carbonation Precast Concrete Development

Steel slag as an alkaline industrial solid waste, possesses the inherent capacity to engage in carbonation reactions with carbon dioxide (CO₂). Capitalizing on this property, the current research undertakes a systematic investigation into the fabrication of high-carbonation precast concrete (HCPC). This is achieved by substituting a portion of the cementitious materials with steel slag during the carbonation curing process. The study examines the influence of varying water-binder ratios, silica fume dosages, steel slag dosages, and sand content on the compressive strength of HCPC. Findings indicate that adjusting the water-binder ratio to 0.18, adding 8% silica fume, and a sand volume ratio of 40% can significantly enhance the compressive strength of HCPC, which can reach up to 104.9 MPa. Additionally, the robust frost resistance of HCPC is substantiated by appearance damage analysis, mass loss rate, and compressive strength loss rate, after 50 freeze-thaw cycles the mass loss, and the compressive strength loss rate can meet the specification requirements. The study also corroborates the high-temperature stability of HCPC. This study optimized the preparation of HCPC and provided a feasibility for its application in precast concrete.