Recovery of Plastics from WEEE through Green Sink-Float Treatment

Increasing demand for electrical and electronic equipment results in the generation of a rapidly growing waste stream, known by the acronym WEEE (waste electrical and electronic equipment). The purpose of this study was to evaluate the effectiveness of green sink-float treatment in sorting plastic polymers typically found in WEEE (PP, ABS, PA6, PS, and PVC). Molasses, a by-product of sugar bio-refining, was added in various concentrations to water to form solutions at different densities. The methodology was initially tested on virgin polymers; later, it was applied to plastics from a WEEE treatment plant. The polymers were characterised through near infrared spectroscopy (NIRS) and Fourier-transform infrared spectroscopy (FTIRS) analyses; the detection of any additives and flame retardants was conducted using the sliding spark technology (SSS2) and scanning electron microscope (SEM-EDX). The results showed that, for plastics from WEEE, the recovery efficiency was 55.85% for PP in a solution of tap water while the remaining part of PP (44.15%) was recovered in a solution of water to which 90% molasses was added. Furthermore, 100% recovery efficiency was obtained for PS and 93.73% for ABS in a solution of tap water with the addition of 10% w/v molasses. A recovery efficiency of 100% was obtained for PVC and 100% for PA6 in a solution consisting solely of molasses.