Piezoelectric Outputs of Electrospun PVDF Web as Full-Textile Sensor at Different Mechanical Excitation Frequencies

With the increasing application of electrospun PVDF webs in piezoelectric sensors and energy-harvesting devices, it is crucial to understand their responses under complex mechanical excitations. However, the dependence of the piezoelectric effect on mechanical excitation properties is not fully comprehended. This study aims to investigate the piezoelectric output of randomly oriented electrospun PVDF nanofiber webs fabricated through different electrospinning processes at various mechanical excitation frequencies. The electrospun PVDF web was sandwiched between two textile electrodes, and its piezoelectric output as a full-textile sensor was measured across a frequency range from 0.1 Hz to 10 Hz. The experimental results revealed that the piezoelectric output of the electrospun PVDF web exhibited a nearly linear increase at excitation frequencies below 1.0 Hz and then reached an almost constant value thereafter up to 10 Hz, which is different from the hybrid PVDF or its copolymer web. Furthermore, the dependency of the piezoelectric output on the excitation frequency was found to be influenced by the specific electrospinning process employed, which determined the crystalline structure of electrospun PVDF nanofibers. These findings suggest that determining an appropriate working frequency for randomly oriented electrospun PVDF nanofiber webs is essential before practical implementation, and the piezoelectric response mode in different mechanical activation frequency ranges can be used to detect different human physiological behaviors.