Scalable Compliant Graphene Fiber-Based Thermal Interface Material with Metal-Level Thermal Conductivity via...

High-performance thermal interface materials (TIMs) are highly desired for high-power electronic devices to accelerate heat dissipation. However, the inherent trade-off conflict between achieving high thermal conductivity and excellent compliance of filler-enhanced TIMs results in the unsatisfactory interfacial heat transfer efficiency of existing TIM solutions. Here, we report the graphene fiber (GF)-based elastic TIM with metal-level thermal conductivity via mechanical-electric dual-field synergistic alignment engineering. Compared with state-of-the-art carbon fiber (CF), GF features both superb high thermal conductivity of ∼1200 W m^-1 K^-1 and outstanding flexibility. Under dual-field synergistic alignment regulation, GFs are vertically aligned with excellent orientation (0.88) and high array density (33.5 mg cm^-2), forming continuous thermally conductive pathways. Even at a low filler content of ∼17 wt %, GF-based TIM demonstrates extraordinarily high through-plane thermal conductivity of up to 82.4 W m^-1 K^-1, exceeding most CF-based TIMs and even comparable to commonly used soft indium foil. Benefiting from the low stiffness of GF, GF-based TIM shows a lower compressive modulus down to 0.57 MPa, an excellent resilience rate of 95% after compressive cycles, and diminished contact thermal resistance as low as 7.4 K mm² W^-1. Our results provide a superb paradigm for the directed assembly of thermally conductive and flexible GFs to achieve scalable and high-performance TIMs, overcoming the long-standing bottleneck of mechanical-thermal mismatch in TIM design.