Detection of moisture content of polyester fabric based on hyperspectral imaging and BP neural network

To validate the feasibility and improve the accuracy of water content detection in polyester fabrics using hyperspectral imaging, 150 sets of hyperspectral images of polyester fabrics with varying thicknesses and moisture contents were obtained, and the characteristics of the spectral curves and impact of moisture content were elucidated. In addition, the area and full width at half maximum of the characteristic peaks around 1363 and 1890 nm were determined as spectral characteristic variables. Furthermore, the models of polyester fabric moisture content detection were developed using backpropagation neural networks, and their accuracy was evaluated using correlation coefficient and mean squared error. It was observed that the change in the moisture content of polyester fabrics not only affected the reflectance of the overall spectral curve of polyester fabrics but also altered the position and overall shape of the characteristic peaks. As the moisture content increased, the proportion of pure water spectra in the mixed spectra of water-containing polyester fabrics also increased, leading to a change in the overall shape of the characteristic peaks of polyester fabrics. Because of the overlap between the near-infrared absorption bands of pure water and the polyester fabric around 1363 and 1890 nm, the area and full width at half maximum of the characteristic peaks were considered to be more representative than the reflection for modeling. The established backpropagation neural network-based moisture content quantitative detection model has shown extremely high detection accuracy, with the correlation coefficient for the test set being higher than 0.999 and the root mean square error being lower than 0.3 %, indicating that the detection error of moisture content was only about 0.3 wt%.