Linear and nonlinear regression modelling of industrial dye adsorption using nanocellulose@chitosan nanocomposite...

Nanocellulose@chitosan (nc@ch) composite beads were prepared via coagulation technique for the elimination of malachite green dye from aqueous solution. As malachite green dye is highly used in textile industries for dyeing purpose which after usage shows fatal effects to the ecosystems and human beings also. In this study the formulated nanocellulose@chitosan composite beads were characterized by Particle size analysis (PSA), Field emission scanning electron microscopy (FESEM), Fourier-transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analysis were done to evaluate nanoparticles size distribution, morphological behaviour, functional group entities and degree of crystallinity of prepared beads. The nanocomposite beads adsorption performance was investigated for malachite green (MG) dye and BET analysis were also recorded to know about porous behaviour of the nanocomposite beads. Maximum removal of malachite green (MG) dye was found to be 72.0 mg/g for 100 ppm initial dye concentration. For accurate observations linear and non-linear modelling was done to know about the best-fitted adsorption model during the removal mechanism of dye molecules, on evaluating it has been observed that Langmuir isotherm and Freundlich isotherm show best-fitted observation in the case of linear and non-linear isotherm respectively (R² = 0.96 & R² = 0.957). In the case of kinetic linear models, the data was well fitted with pseudo-second-order showing chemosorption mechanism (R² = 0.999), and in the case of non-linear kinetic model pseudo first order showed good fit showing physisorption mechanism during adsorption (R² = 0.999). The thermodynamic study showed positive values for ΔH° and ΔS° throughout the adsorption process respectively, implying an endothermic behaviour. In view of cost effectiveness, desorption or regeneration study was done and it was showed that after the 5th cycle, the removal tendency had decreased from 48 to 38 % for 20-100 ppm dye solution accordingly. Thus, nanocomposite beads prepared by the coagulation method seem to be a suitable candidate for dye removal from synthetic wastewater and may have potential to be used in small scale textile industries for real wastewater treatment.