Selection of an alternate cementitious mortar using ceramic tile dust waste: a hybrid MCDM approach

Selection of a suitable alternative material from a pool of alternatives with many conflicting criteria becomes a Multi-Criteria Decision Making (MCDM) problem. In the present study, ternary blended mortars were prepared using ceramic tile dust waste (CTD), fly ash (FA), and ground granulated blast furnace slag (GGBFS) as binder components. Crusher dust (CD) was used as a fine aggregate component. Binder to aggregate ratios of 1:3 and 1:1 were prepared considering suitable flow. A total of 16 mortar mixes were cast. These mortars were tested for various conflicting criteria compressive strength, flexural strength, porosity, water absorption, bulk density, thermal conductivity, specific heat, thermal diffusivity, and thermal effusivity whose weightages obtained were 29.09%, 20.08%, 12.77%, 10.60%, 8.74%, 6.74%, 5.54%, 4.47%, and 1.97%, respectively, as per AHP analysis. Later, considering these different criteria and alternate mortars, it was observed that a 1:1 mortar with 20% CTD, 30% FA, and 50% GGBFS (RC20F30G50) is found to be the suitable mortar with the highest relative closeness coefficient of 0.861 and the highest net outranking flow of 0.316 with respect to MCDM techniques: technique for order of preference by similarity to ideal solution (TOPSIS) and preference ranking organization method for enrichment of evaluations (PROMETHEE-II), respectively. The ranking of the mortar in both methods complies with the relative weightages of the criteria and the performance of the mortars with respect to the above criteria.