Highly-efficient low-cost polarization-sensitive organic photodetectors based on laminated self-assembly planar and...

To overcome the severe problems arising from the insufficient light absorption of ultrathin self-assembly active layers and the high cost use of atomic force deposition (ALD)-grown low-leakage-current transport layers, we successfully developed a low-cost, simple and facile strategy of floating-film transfer and multilayer lamination (FFTML) for constructing highly-efficient ALD-free broadband polarization-sensitive organic photodetectors (OPDs) with the two commonly used structures of donor/acceptor planar heterojunction (PHJ) and donor:acceptor multilayer bulk heterojunction (BHJ). It was found that the PHJ-based polarization-sensitive OPD by FFTML possesses a low dark current due to the high carrier injection barrier, indicating it is more suitable to be applied in low polarized light detection scenarios. In contrast, the BHJ-based device by FFTML has a higher spectral responsivity in the whole wavelength due to more photo-excitons transferred to the donor:acceptor interface and dissociated into photoexcited carrirers. Furthermore, the film thickness, which is tuned by increasing lamination number of BHJ layers, has a big effect on the polarization-sensitive photodetection performance. The polarization-sensitive 4-BHJ OPD by FFTML finally achieved a high specific detectivity of 8.33 × 10¹⁰Jones, which was much higher than 2.72 × 10¹⁰Jones for the 2-BHJ device at 0 V. This work demonstrates that layer-by-layer lamination of self-assembly films can effectively improve the polarized-light detection performance, contributing significantly to the rapid development of the field.