Related Experiment Video
Updated: Jun 22, 2025

In Situ Transmission Electron Microscopy with Biasing and Fabrication of Asymmetric Crossbars Based on Mixed-Phased a-VOx
Published on: May 13, 2020
Compositional effects of hybrid MoS2-GO active layer on the performance of unipolar, low-power and multistate RRAM
1School of Electronics Engineering (SENSE), Vellore Institute of Technology, Chennai, India.
Abstract:
Currently, 2D nanomaterials-based resistive random access memory (RRAMs) are explored on account of their tunable material properties enabling fabrication of low power and flexible RRAM devices. In this work, hybrid MoS2-GO based active layer RRAM devices are investigated. A facile hydrothermal co-synthesis approach is used to obtain the hybrid materials and a cost-effective spin coating method adopted for the fabrication of Ag/MoS2-GO/ITO RRAM devices. The performance of the fabricated hybrid active layer RRAM device is analysed with respect to change in material properties of the synthesized hybrid material. The progressive addition of 0.5, 1.5, 2.5 and 4.5 weight % of GO to MoS2, results in a hybrid active layer with higher intermolecular interaction, in the case of Ag/MoS2-GO4.5/ITO RRAM device, resulting in a unipolar resistive switching RRAM behavior with low SET voltage of 1.37 V and highIon/Ioffof 200 with multilevel resistance states. A space charge limited conduction mechanism is obtained during switching, which may be attributed to the trap states present due to functional groups of GO. The increased number of conduction pathways on account of both Ag+ions and oxygen vacancies (Vo2+), participating in the formation of conducting filament, results in higherIon/Ioff. This is the first report of unipolar Ag/MoS2-GO/ITO RRAM devices, which are particularly important in realizing high density crossbar memories for neuromorphic and in-memory computing as well as enabling flexible 2D nanomaterials-based memristor applications.
More Related Videos
08:50Preparation of Large-area Vertical 2D Crystal Hetero-structures Through the Sulfurization of Transition Metal Films for Device Fabrication
Published on: November 28, 2017
08:12Ohmic Contact Fabrication Using a Focused-ion Beam Technique and Electrical Characterization for Layer Semiconductor Nanostructures
Published on: December 5, 2015
Related Concept Videos
MOS Capacitor
The metal gate is typically made from highly conductive materials such as aluminum or polysilicon. Beneath the metal gate lies a thin layer of...
Characteristics of MOSFET
Various vital parameters influence their functionality, which is crucial for theory and electronics applications. First, channel dimensions, precisely length, and width, are pivotal. The size of these channels affects the transistor's ability to carry current and switching speeds; shorter channels typically enable...
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no...
MOSFET
In an n-MOSFET, the structure includes n-type source and drain...
MOSFET: Depletion Mode
The primary characteristic of depletion-mode MOSFETs is their ability to conduct current between the drain and source terminals without gate bias. This inherent conductivity...
Metal-Semiconductor Junctions
Schottky Barriers
Schottky barriers arise when a metal with a work function (Φm) contacts a semiconductor with a different work function (Φs). Initially, electrons transfer until the Fermi levels of the metal and semiconductor align at equilibrium. For instance, if Φm > Φs, the semiconductor Fermi level is higher than the metal's before contact. The...