Numerical study on the stimulation effect of boundary sealing and hot water injection in marine challenging gas...

This study proposed a novel development mode combining boundary sealing and hot water injection to address the challenges of gas leakage, limited reservoir sensible heat, boundary water intrusion, and low productivity faced by challenging hydrate extraction, and the stimulation effect was numerically investigated with Shenhu hydrates as the geological background. The results showed that lower boundary permeability facilitated pressure propagation and achieved volumetric dissociation of hydrates, whereas insufficient formation energy resulted in substantial gas retention. Hot water injection was effective for stimulation, but open boundaries could not maintain the high injection pressure, leading to massive hot water losses and gas escapes. However, their combination achieved a synergistic stimulation like "1 + 1 > 2" because a piston water drive similar to secondary recovery in oil and gas development was formed. Relative to three-spot well patterns, the five-spot shortened the extraction cycle by 680 days and enhanced the gas-to-water ratio by 17%. Increasing injection pressure enhanced water yield more significantly while the improvement of gas yield was more significant by increasing hot water temperature. Overall, high-pressure and high-temperature injection was suggested for gas enhancement and water control. These findings provide important guidance for advancing the commercial development of challenging hydrates.