Preparation and Rheological Properties of the PVA/CMC/Gel Composite for Mining

A composite gel material with an interpenetrating network structure was formed using the chemical cross-linking method. The viscosity, yield stress, and thixotropy of a poly(vinyl alcohol)/carboxymethyl cellulose/gelatin (PVA/CMC/Gel) composite gel slurry with different ratios were tested using a viscometer, and the interaction between the surface of the gelling agent and the cross-linking agent was analyzed by calculating the frontline orbital energy of a single polymer material molecule. The seepage diffusion characteristics of the composite gel in a goaf were then studied through a numerical simulation. The results indicate that the PVA/CMC/Gel composite gel exhibits shear thinning behavior following the power law model and behaves as a pseudoplastic fluid. The optimal ratio for the composite gel at 30 °C is determined as follows: 30 wt % for the gelling agent (PVA/(Gel + CMC) = 20:10), 4 wt % for the cross-linking agent, 3.09 wt % for the carbide slag, 7.5 wt % for the alcohol amine solution, and 0.5% sodium dodecyl sulfonate + 0.1% alkyl glycoside for the foaming agent. Gel exhibits the lowest energy band gap (0.096 eV), indicating strong reaction activity and strong reaction with the cross-linking agent (sodium tetraborate). PVA has the largest energy band gap (0.238 eV), strong molecular stability, and weak reaction with the cross-linking agent (sodium tetraborate). When the dip angle of the goaf is 4° and the injection time is 40 min, the composite gel tends to diffuse more easily along the dip. The investigation into the rheological properties of the PVA/CMC/Gel composite gel holds significant importance in the design of coal mine pipeline transportation and understanding diffusion flow in goaf.