Fabrication and characterization of multi-layered coaxial agar-based electrospun biocomposite mat, novel replacement...

In the performed study, a novel fabrication of agar-based nanofibers was electrospun in an asymmetric bilayer dressing for biomedical transdermal patches. The optimal parameters for the fabrication of agar-based nanofibers after optimization were a feed rate of 10 μL/min, a 7 cm collector-to-nozzle distance, a 15 kV applied voltage, and a 700-rpm rotating collector speed. Coaxial nanofibers, as a second asymmetric layer, were produced using polyvinyl alcohol (PVA) with cephalexin hydrate, an antibacterial drug, as the core and agar-PCL as the sheath. The morphology of the developed uniaxial and coaxial nanofibrous layers was analysed using a scanning electron microscope and transmission electron microscopy, respectively. For the formation of bilayer asymmetric structures, the agar-PCL uniaxial layer was fabricated over the layer of coaxial PVA and agar-PCL layers for sustained drug release. The agar-based nanofibrous mats exhibited tensile strength of 7 MPa with 40 % elongation failure, 8-fold increased swelling, enhanced wettability (60° contact angle), and a moisture transmission rate of 2174 g/m²/day. The developed coaxial bilayer mats exhibited antimicrobial activity, hemocompatibility, and cytocompatibility. Overall, this novel agar nanofibrous dressing offers promising potential for advanced biomedical applications, particularly as transdermal patches for efficient drug delivery systems.