In-situ amino-functionalized and reduced graphene oxide/polyimide composite films for high-performance triboelectric...

As a promising sustainable power source in intelligent electronics, Triboelectric Nanogenerators (TENGs) have garnered widespread interest, with various strategies explored to enhance their output performance. However, most optimization methods for triboelectric materials have focused solely on tuning chemical compositions or fabricating surface microstructures. Here, we have prepared amino-functionalized reduced graphene oxide (FRGO)/polyimide (PI) composite films (PI-FRGO) via in-situ polymerization, aimed at enhancing PI materials' nanotribological power generation performance. By varying the doping levels of amino groups and controlling the FRGO proportion during synthesis, we can explore the optimal FRGO/PI composite film ratio. At a p-Phenylenediamine: reduced Graphene Oxide (PPDA: RGO) ratio of 1:1 and an FRGO addition of 0.1 %, the output electrical performance peaks with a voltage of 58 V, a charge of 33 nC and a current of 12 μA, nearly 2 times that of a pure PI film. We have fabricated a TENG with an optimally formulated PI-FRGO composite to explore its application potential. Under a 10 MΩ external load resistance, the TENG can deliver a power density of 3.5 mW/m² and can be powering small devices. This work presents new effective strategies to significantly enhance TENG output performance and promote their widespread application.