Feasibility experimental study on plugging leakage in goaf based on two-phase foam

Air leakage in goaf often leads to coal spontaneous combustion (CSC), which not only directly affects the safety production of mines but also causes significant environmental damage. Therefore, effectively sealing the airflow in goaf is crucial for preventing CSC. Feasibility experiments on using two-phase foam to seal air leakage in goaf were conducted, leveraging the advantages of large flow rate, wide diffusion range, and good accumulation characteristics of two-phase foam. The research results indicate that continuous injection of foam into loose media with maintained ventilation can completely seal the air leakage, with the foam capable of withstanding wind pressures of nearly 600 Pa. When the foam is used for one-time sealing with a length of 2 m, it remains effective for 60 min, and the sealing effectiveness improves with longer distances sealed against air leakage. Numerical simulation analysis and field measurements of airflow leakage in mine working faces reveal that effectively sealing the airflow passage in the goaf behind the corner of the return airway is crucial for preventing CSC. Two methods are proposed for sealing external airflow during coal mining: foam injection using a point drilling method near the heading and an incremental buried pipe injection method. Finally, the feasibility of two-phase foam sealing technology for goaf airflow leakage is analyzed from multiple perspectives including sealing effectiveness, practicality, economy, foaming process, and engineering implementation. The research findings provide new insights into goaf sealing technology, aiding in addressing safety and environmental issues caused by spontaneous combustion in goaf areas.