Innovative microbial water quality management in water distribution systems using in-pipe hydropowered UV
Daniel Ma1, Clarissa Belloni2, Natalie M Hull1,3
1Department of Civil, Environmental and Geodetic Engineering, The Ohio State University, Columbus, OH, USA.
Abstract:
Hydropower UV disinfection has not been explored as a possible alternative for off-grid disinfection. Hydropowered UV LED technology was developed using off-the-shelf UV-C LEDs and pico - and femto-scale hydro turbine generators and evaluated across point-of-use relevant flow rates. Commercially available UV LED flow through reactors were subjected to microorganism challenge testing with 3 power schemes: wall-plug, hydropower, and hydropower-charged battery. UV LEDs powered by hydropower-charged battery demonstrated similar disinfection as wall-plug powered UV LEDs, achieving 0.5-1.8 MS2 log10 reduction at flow rates 0.5-2.3 L min-1, corresponding to reduction equivalent doses (RED) up to 16 or 30 mJ/cm2 for 254 and 285 nm, respectively. With hydropowered UV LEDs alone, MS2 log10 reduction decreased to <0.3 log10 reduction due to an underperforming and grossly inefficient turbine, with RED of 8 or 18 mJ/cm2 for 254 and 285 nm, respectively. Assessment of existing markets of UV disinfection systems and pico-hydro turbines demonstrated that hydropowered UV systems are already theoretically feasible for scales at point-of-entry (POE) and above. Economic feasibility will improve if turbines and/or UV system efficiencies improve. Prototype hydropower UV LED systems ranged from $145 to 220 depending on the UV LED reactor, and the battery system added $81. This study demonstrates the practicality of sustainable, renewable energy POU UV disinfection technology that can benefit decentralised, off-grid, rural and remote communities. The system may also scale up to provide renewable energy disinfection at larger scales, such as buildings and water distribution systems, for protecting human health in highly populated areas.
