Comparison of the Shear Bond Strength Using Primers with Different Application Numbers on Dental Zirconia

This study examined the effect of the number of phosphate-containing primer applications on the shear bond strength (SBS) of zirconia to resin cement.

315 square specimens (10 × 10 × 4 mm³) were manufactured from Cercon ht presintered zirconia blocks. Alumina particles were used to sandblast zirconia specimens. These specimens were randomly divided into six primer-based groups: No primer application (NP), CLEARFIL CERAMIC PRIMER (C), PANAVIA V5 Tooth Primer (T), M&C PRIMER (MC), Monobond N (MN), and Z-PRIME plus (Z), and then separated into application number (1-4) groups (excluding NP). Each specimen was bonded with resin cement. The SBS was measured using a universal testing machine. The debonded surface was examined with a stereomicroscope.

The SBSs were analyzed using two-way analysis of variance.

Applying the primer twice exhibited the highest SBSs in each group, with significant differences in the T, MN, and Z groups. However, the SBS in the MC group was significantly lower on the second application. One-hundred percent adhesive failure was observed in all groups.

Within the limitations of this study, prior to cementation, the sandblasted zirconia surface should be applied twice with a phosphate-containing primer other than MC to maximize the SBS at the zirconia-resin cement interface.