Impact of bismuth oxide on structural, optical and gamma-ray shielding properties of calcium-sodium-borate glasses

In the present study, we have prepared six glass samples of bismuth borate using the melt-quenching method with the composition (70-x)B2O3-10CaO-20Na2O-xBi2O3; x = 0, 3, 6, 9, 12 and 15 mol%. The density of the prepared glasses was determined using Archimedes principle. The X-ray diffraction patterns provide confirmation of the amorphous nature of the prepared samples, whereas the Fourier transform infrared measurements pointed to the existence of structural units like BO3, BO4, BiO3 and BiO6 within the glass network. An assessment of the optical absorption spectra unveiled that with the increase in the bismuth oxide content, there was a decrease observed in both the direct and indirect band gap energies. Specifically, they decreased from 3.40 to 2.79 eV and from 3.10 to 2.46 eV, respectively. The properties related to gamma ray attenuation, including the mass attenuation coefficient (μm), effective atomic number (Zeff), half-value layer (HVL) and mean free path (MFP), were examined for all the glass samples. This investigation was carried out using the Phy-X/PSD software, covering the energy range from 0.511 to 1.332 MeV. Out of all the samples, Bi-15, featuring the highest Bi2O3 content, demonstrated the highest μm, Zeff, the smallest HVL and MFP. These results suggest that the glass with 15 mol% of Bi2O3 offers the most effective gamma radiation shielding performance. Moreover, the glasses examined in this study exhibit superior radiation shielding characteristics compared with specific concrete types, namely, ordinary concrete, Hematite serpentine concrete and barite concrete, as well as commercial glasses such as RS-360 and RS-253.