[Rapid Start-up of Continuous Autotrophic Nitrogen Removal Reactor by Hybrid-inoculating PN and PN/A Granular...

The rapid cultivation of partial nitritation/ANAMMOX （PN/A） granular sludge in a continuous-flow mode is one of the key technologies for efficient biological nitrogen removal in domestic wastewater treatment. Compared with that in PN/A granular sludge, PN granular sludge demonstrates a shorter incubation period and suitability for batch culture. It is also a good carrier for enriching ANAMMOX （AMX） bacteria. In this study, we established a continuous-flow autotrophic nitrogen removal process in three continuously stirred tank reactors （CSTR） （R1-R3） by hybrid-inoculating PN/A and PN granular sludge at the mass ratios of 3∶1, 1∶1, and 1∶3, respectively. By implementing high ammonium nitrogen loading and short hydraulic retention time, continuous autotrophic nitrogen removal processes were successfully started up in the three CSTRs. The results showed that compared with that of R1 and R2, R3 had a longer start-up time but a similar steady-state nitrogen removal performance. The total nitrogen removal load of R3 could be more than 2.6 kg·（m³·d）^-1. Intriguingly, the inoculated PN granular sludge served as a precursor for PN/A granular sludge cultivation. This approach facilitated the enrichment of anaerobic ammonia-oxidizing bacteria （AMX） by introducing abundant ammonium-oxidizing bacteria （AOB） and nitrite nitrogen substrates into the CSTR. According to the results of high-throughput sequencing, the microbial abundance and diversity of the mature granules in R1-R3 were significantly higher than those of the inoculation sludge. AOB （genus Nitrosomonas）, AMX （genera Candidatus Kuenenia and Candidatus Brocadia）, and symbiotic heterotrophs, such as Chloroflexi, Bacteroidetes, and Chlorobi, drove the autotrophic nitrogen removal process and maintained the stability of the granular structure. In summary, a novel start-up strategy of hybrid-inoculating granular sludge was provided for a continuous-flow autotrophic nitrogen removal in engineering application.