Study on preparation and properties of antifreeze compound road dust suppressant

Open-pit mine pavement dust dries and breaks easily. As such, a composite pavement dust suppressant with good wettability, moisturizing, coagulation, and antifreezing properties in winter was investigated. Monomer screening and orthogonal experiments were conducted, using evaporation rate, permeability rate, viscosity, and freezing point as evaluation indexes. Consequently, a dust suppressant solution is a mixture of glycerol (GLY), sodium dodecylbenzene sulfonate (SDBS), polyacrylamide (PAM), compound propylene glycol (PG), and potassium acetate (PA). The characteristics of the dust suppressant and its interaction mechanism with road dust were measured and analyzed. The results showed that the optimal ratio of the antifreeze-type composite dust suppressant is 3%GLY, 0.30%SDBS, 0.07% PAM, and 50%PG + 10%PA; the contact angle is 27.62°, which can effectively wet coal dust. Moreover, it easily forms hydrogen bonds with water molecules to release free -OH, which increases the oxygen-containing functional groups in the dust. The maximum viscosity is 25.4 mPa·s, and the hydrophobic groups adsorbed on the surface of the dust can condense and agglomerate the dust to form large particles, and effectively inhibit the occurrence of dust. It freezes at - 34.2 ℃, resists a temperature of - 30 ℃ without freezing, and improves dust suppression efficiency and antifreezing effect in cold areas.