Construction of adamantane-based monolithic column with three-dimensionally porous structure for small molecules...

The fabrication technique of capillary column is the key to the development and application of capillary liquid chromatography (cLC) to improve separation efficiency for analytes. The capillary monolithic column possessed three-dimensionally connected porous or channel structures. Unique porous structure endows excellent permeability and high performance in diverse fields, especially in separation. Thereinto, organic monolithic columns have attracted widespread attention due to their advantages of simple preparation and excellent biocompatibility. However, their separation selectivity needs to be further developed and regulated to apply the separation of more diverse samples.

A novel polymeric monolithic column was prepared via thermally initiated in situ copolymerization of 2-methyladamantan-2-yl acrylate (MADA) with ditrimethylolpropane tetraacrylate (DTTA) in fused silica. The prepared poly(MADA-co-DTTA) monolith showed adjustable permeability, developed porous structure and high thermal stability. Consequently, it exhibited excellent separation capability of small molecules (alkylbenzenes and polycyclic aromatic hydrocarbons). Especially, when acetonitrile/water (60/40, v/v) was used as the mobile phase, the theoretical plate numbers reached 84,000 plates m^-1 for butylbenzene at a linear velocity of 0.5 mm s^-1. Most importantly, the hydrophobicity of the poly(MADA-co-DTTA) monolithic column was regulated via host-guest interaction between adamantyl group and cucurbit [7]uril (CB[7]). Additionally, the poly(MADA-co-DTTA) monolith was further adopted for the analysis of the tryptic digest of proteins from HeLa by cLC-MS/MS. The 33,783 unique peptides and 5,299 proteins were identified on the monolith, which exhibited great separation ability for complex samples.

Due to abundant pore structure and good chemical properties, the poly(MADA-co-DTTA) monolithic column exhibited high performance for the separations of small molecules and biological sample. Meanwhile, owing to the existence of adamantyl-group, CB[7] was immobilized on the poly(MADA-co-DTTA) monolithic column to fabricate poly(MADA-co-DTTA)-CB[7] by host-guest interaction. It is possible to adjust the surface chemistry of the monolithic materials to accommodate more complex analytes.