Sustainable Mixed-Halide Perovskite Resistive Switching Memories Using Self-Assembled Monolayers as the Bottom...

The complex ionic-electronic conduction in mixed halide perovskites enables their use beyond von Neumann architectures implemented in resistive switching memory devices. Although device fabrication based on perovskite compounds involves solution-processing at low temperatures, reducing further fabrication costs by eliminating expensive materials can improve their compatibility with upscalable deposition techniques. Notably, the substrate on which the perovskite active layer is developed has been reported to severely affect its quality and thus the overall device performance. Hereby, we demonstrate the sustainable manufacturing of memristive perovskite solar cells by replacing the expensive poly[bis(4-phenyl)(2,4,6-trimethylphenyl)amine] (PTAA) that serves as a hole transporting layer (HTL) with a self-assembled monolayer (SAM), namely [2-(3,6-dimethoxy-9H-carbazol-9-yl)ethyl]phosphonic acid (MeO-2PACz). Multiple sequential memristive current-voltage characteristics of single devices are reported, and average data of multiple reference and targeted devices are compared. Resistive switching memory devices based on SAM exhibit improved performance having reduced average SET voltage values and narrower statistical variation compared to reference devices with PTAA. It is shown that both PTAA and SAM based devices exhibit high ON/OFF ratio of about 10³ operating at low switching electric fields. Replacing an expensive polymer-based HTL with this approach reduces fabrication costs compared to PTAA.