Tailoring the Density of State of n-Type Conjugated Polymers through Solvent Engineering for Organic Electrochemical...

Conjugated polymers with ethylene glycol-type side chains are commonly used as channel materials in organic electrochemical transistors (OECTs). To improve the performance of these materials, new chemical structures are often created through synthetic routines. Herein, we demonstrate that the OECT performance of these polymers can also be improved by changing their density-of-state (DOS) profile through solvent engineering. Depending on the solvent polarity, it solvates the backbone and side chains of the conjugated polymer differently, leading to differences in molecule orientation, π-stacking paracrystallinity, and film defects, such as grain boundaries and pinholes. This then results in a change in the DOS profile of the polymer. A more intense and narrow-width DOS distribution is usually observed in organic films with an "edge on" orientation and fewer film defects, while films with a "face on" orientation and apparent defects show a broadened DOS profile. The OECT devices that use the polymer film with a more intense and narrow-width DOS profile exhibit a better-normalized transconductance and figure-of-merit μC* than those with a broadened DOS profile (0.74 to 4.29 S cm^-1 and 3.5 to 14.3 F cm^-1 V^-1 s^-1). This study provides useful insights into how the DOS profile affects the mixed ionic-electronic conduction performance and presents a new avenue for improving n-type OECT materials.