Modelling and optimization of fenton process for decolorization of azo dye (DR16) at microreactor using artificial...

The Fenton process is widely employed for decolorizing industrial wastewater. Therefore, it is imperative to construct a model for optimizing the operational parameters and estimating the efficiency of decolorization within this process. In this study, an artificial neural network (ANN) model was created based on experimental data provided by a previous researcher who examined the decolorization of Direct Red 16 dye (DR16) using a heterogeneous Fenton process within a microchannel reactor. This model was utilized to optimize and forecast the efficiency of decolorization in the Fenton process. The accuracy of the model was validated by comparing its outcomes with actual experimental data. To further improve the efficiency of decolorization, optimal operational parameters were ascertained utilizing the genetic algorithm method. The study revealed that as dye concentrations increased from 10 to 40 mg/l, decolorization efficiencies improved proportionately, peaking at 89.78 %. Optimal operational parameters for maximizing efficiency were identified as a feed flow rate of 1 ml/min, H₂O₂ concentration at 500 mg/l, Fe2+ concentration of 4 mg/l, and maintaining pH between 2.6 and 2.8. Insights derived from both experimental and model-generated data were used to analyze the impact of operational parameters on decolorization efficiency.