Developing a Passive Dosing Method for Acute Aquatic Toxicity Tests of Cationic Surfactant Benzalkoniums (BACs)

Benzalkonium chlorides (BACs) have been of environmental concern due to their widespread use and potential harm. However, challenges arise in defining and controlling the exposure concentration (C_w) in aquatic toxicity tests involving BACs with a long alkyl chain (i.e., #C > 14). To address this, a novel passive dosing method was introduced in the 48 h-acute ecotoxicity test on Daphnia magna and compared to the conventional solvent-spiking method in terms of C_w stability and toxicity results. Among 13 sorbent materials tested for their sorption capacity, poly(ether sulfone) (PES) membrane was an optimal passive dosing reservoir, with equilibrium desorption of BACs to water achieved within 24 h. The C_w of BACs remained constant in both applied dosing methods during the test period. However, the C_w in solvent-spiking tests was lower than the nominal concentration for long-chain BACs, particularly at low exposure concentrations. Notably, the solvent-spiking tests indicated that the toxicity of BACs increased with alkyl chain length from C6 to 14, followed by a decline in toxicity from C14 to 18. In contrast, the passive dosing method displayed similar or slightly increasing toxicity levels of BACs from C14 to C18, indicating higher toxicity of C16 and C18-BACs than that inferred by the solvent spiking test. These findings emphasize the potential of applying this innovative passive dosing approach in aquatic toxicity tests to generate reliable and accurate toxicity data and support a comprehensive risk assessment of cationic surfactants.