Magnetic multi-template molecularly imprinted polymers for selective simultaneous extraction of chlorophenols...

Magnetic multi-template molecularly imprinted polymers (M-mt-MIPs) were successfully synthesized by surface imprinting and multi-template imprinting strategy, using polydopamine coated magnetic multi-walled carbon nanotubes as supporting materials, five typical chlorophenols (CPs) as templates, methacrylic acid as functional monomer and ethylene glycol dimethacrylate as cross-linker. Compared to non-imprinted polymers (NIPs), the as-prepared M-mt-MIPs showed high adsorption capacity (32.58‒80.63 mg g^-1), rapid mass transfer and specific selectivity for the five targeted CPs, which were applied as magnetic solid-phase extraction (MSPE) adsorbents. Parameters affecting MSPE efficiency were detailed investigated, such as adsorbents dosage, sample pH, extraction time, type and volume of desorption solvent and salt effect. Combined with HPLC-DAD, a simple, rapid and sensitive method was established, showing good linearity (2‒200 μg L^-1), low limits of detection (0.32‒0.49 μg L^-1), and high enrichment factors (35.2‒108). The developed M-mt-MIPs-MSPE-HPLC method was applied to enrich and determine CPs in tannery wastewater, wet-blue and crust leather, and satisfactory spiking recoveries were attained in the range of 73.95‒109.7% with relative standard deviations (RSDs) of 2.13-8.48%. This study provided a new alternative material and method to rapid simultaneously extract and analyze low concentration of typical CPs in complicated matrices.