Relating the ultrasonic and aerosol filtration properties of filters

Non-contact methods are useful to improve the quality control of particle filtration media. The purpose of this paper is to investigate the correlation between the filtration efficiency of a porous sheet and its ultrasonic properties obtained using a non-contact technique. An air-coupled ultrasonic technique is used to obtain rapid measurements without affecting the integrity of the material. High frequencies (from 0.1 to 2.5 MHz) are used to improve technique sensitivity, and transmitted waves are measured to probe the internal properties of the material. Measurements of transmission coefficient spectra (amplitude and phase) and the corresponding ultrasound velocity and attenuation coefficient at different frequencies are obtained for a set of filtration media with well-characterized properties. Results show that the ultrasonic properties of filtration media vary as a function of basis weight, and therefore filtration efficiency, for a given charge state. However, the effect of electrostatic charge on ultrasonic propagation is almost negligible, as expected. We conclude that ultrasonic transmission may provide a valuable tool for the continuous online monitoring of material quality during fabrication and as a method to tease apart mechanical and electrostatic contributions to particle filtration.