Application of Recycled Ultrafiltration Membranes in an Aerobic Membrane Bioreactor (aMBR): A Validation Study

A validation study using recycled ultrafiltration membranes (r-UF) on an aerobic membrane bioreactor (aMBR) was conducted for the first time. Four different polyethersulfone (PES) membranes were tested using synthetic urban wastewater (COD 0.4-0.5 g/L) during two experimental periods: (i) recycled ultrafiltration membrane (r-UF) and commercial UF membrane (molecular weight cut-off (MWCO) 150 kDa) (c-150 kDa); (ii) r-UF membrane modified by dip-coating using catechol (CA) and polyethyleneimine (PEI) (mr-UF) and c-20 kDa membrane. Permeability, fouling behavior, and permeate quality were evaluated. Extensive membrane characterization was conducted using scanning electron microscopy (SEM), atomic force microscopy (AFM), energy-dispersive X-ray (EDX), and confocal laser scanning microscopy (CLSM). Permeate quality for r-UF and mr-UF membranes was excellent and comparable to that obtained using commercial membranes under similar conditions. Additionally, r-UF and mr-UF membranes presented a steadier performance time. Additionally, r-UF membrane demonstrated less tendency to be fouled (R_f, m^-1) r-UF 7.92 ± 0.57 × 10¹²; mr-UF 9.90 ± 0.14 × 10¹², c-150 kDa 1.56 ± 0.07 × 10¹³ and c-20 kDa 1.25 ± 0.50 × 10¹³. The r-UF membrane showed an excellent antibiofouling character. Therefore, r-UF membranes can be successfully implemented for wastewater treatment in aMBR, being a sustainable and cost-effective alternative to commercial membranes that can contribute to overcome membrane fouling and membrane replacement issues.