Measurement of wing motion, deformation, and inertial forces of a biomimetic butterfly

This paper introduces a method for measuring wing motion, deformation, and inertial forces in bio-inspired aircraft research using a camera motion capture system. The method involves placing markers on the wing surface and fitting rigid planes to determine the wing's spatial axis. This allows for describing the wing's rigid motion and obtaining deformation characteristics, such as deflection, twist angle, and gap distance of the forewing and hindwing. An image-based method is proposed for determining wing mass distribution, mass blocks, and mass points for inertial force measurement. The study addresses wing motion, deformation, and inertial force measurement in a real butterfly-like flapping wing vehicle and demonstrates the effectiveness of the approach. The results reveal that inertial forces play a negligible role in the generation of lift peaks and contribute minimal lift during the entire flapping cycle. Furthermore, a transitional phase between downstroke and upstroke is found in flexible wing motion, which has high lift production. This measurement approach offers a rapid and effective solution to experimental challenges in bio-inspired aircraft design and optimization.