The Influence of Slide Burnishing on the Technological Quality of X2CrNiMo17-12-2 Steel

Metal products for the metallurgical and machinery industries must meet high requirements in terms of their performance, including reliability, accuracy, durability and fatigue strength. It is also important that materials commonly used to manufacture such products must meet specific requirements. Therefore, various techniques and technologies for modifying the surface layer are becoming more and more widely used. These include burnishing, which may be dynamic or static. This article studies the process of slide burnishing of surfaces of cylindrical objects. The burnishing was performed using a slide burnisher with a rigid diamond-tipped clamp on a general-purpose lathe. The tests were performed for corrosion-resistant steel X2CrNiMo17-12-2. The aim of the research was to determine the impact of changes in burnishing conditions and parameters-feed rate, burnisher depth and burnishing force at a constant burnishing speed-on the surface roughness and hardness. Additionally, the microstructure was assessed in the critical areas: the surface and the core. Another phenomenon observed was surface cracking, which would be destructive due to the occurrence of indentation. In the paper, it was stated that the microstructure, or rather the grains, in the area of the surface layer was oriented in the direction of deformation. It was also observed that in the area of the surface layer, no cracks or other flaws were revealed. Therefore, slide burnishing not only reduces the surface roughness but hardens the surface layer of the burnished material.