The Advancement of Waterjet-Guided Laser Cutting System for Enhanced Surface Quality in AISI 1020 Steel Sheets

This study investigates the effects of a water-guided laser on the cutting performance of AISI 1020 steel sheets of various thicknesses by comparing the results with respect to a conventional laser. For this purpose, a novel nozzle design has been devised enabling the delivery of laser beams to the workpiece conventionally as well as through water guidance. Diverging from prior literature, a fiber laser is used with a high wavelength and a laser power output of 1 kW. Experiments are conducted on steel sheets with thicknesses ranging from 1.5 mm to 3 mm using three different cutting speeds and laser power levels. Analysis focuses on assessing surface roughness, burr formation and heat effects on the cut surfaces for both conventional and waterjet-guided cutting. Surface roughness is evaluated by using a 3D profilometer and cut surfaces are examined through SEM imaging. The results showed that the waterjet-guided laser system greatly reduced surface roughness and minimized problems associated with traditional laser cutting such as kerf, dross adherence and thermal damage. The study revealed that cutting speed had a greater effect on surface roughness reduction than laser power, with the most noticeable differences occurring in thinner sheets. Furthermore, the investigation suggests that the waterjet-guided laser cutting system demonstrates superior performance relative to conventional methods, particularly in surface quality.