Related Experiment Video
Updated: Jun 18, 2025

Quasistatic Mechanical Testing for Computer-Aided Design and Manufacturing Occlusal Veneers Cemented to Milled Dentin Analog Material
Published on: December 20, 2024
Weathering Tests on Raw and Consolidated Vicenza Stone
Ilaria Capasso1, Abner Colella2, Fabio Iucolano3
1Department of Engineering and Geology, University of Chieti-Pescara "G. d'Annunzio", Viale Pindaro 42, 65122 Pescara, Italy.
Abstract:
The preservation of cultural heritage, particularly historical stone structures, represents a very challenging matter due to several environmental and anthropogenic factors. Vicenza stone, a calcareous rock known for its historical significance and widespread use in architectural masterpieces, requires significant attention for conservation. In fact, as the demand for sustainable and effective preservation methods intensifies, the exploration of innovative consolidation strategies becomes essential. To this end, inorganic consolidants, based on alkaline silicate formulations and nano-silica, were explored for their promising performance in enhancing the surface properties and chemical stability of Vicenza stone. In particular, the durability of treated and untreated Vicenza stone samples was evaluated by means of accelerated weathering tests such as freeze-thaw cycles, salt crystallization and simulation of acid rain. The experimental results revealed that Vicenza stone is very resistant to the effects of freeze-thaw cycles and acid rain; both the accelerated weathering tests did not show significant differences between treated and untreated VS samples. A different behavior was detected for the test for resistance to salt crystallization, whose findings led us to deduce that, for this kind of degradation, it is possible to observe a more beneficial effect of the consolidation treatments on the stone durability.
More Related Videos
07:32Monitoring Pedogenic Inorganic Carbon Accumulation Due to Weathering of Amended Silicate Minerals in Agricultural Soils.
Published on: June 4, 2021
07:47Experimental Protocol to Investigate Particle Aerosolization of a Product Under Abrasion and Under Environmental Weathering
Published on: September 16, 2016
Related Concept Videos
Abrasion Resistance of Concrete
One such test is the revolving disc test, where three plates...
Toughness and Hardness of Aggregate
Types of Building Stone
Igneous rocks are formed from the solidification of magma or lava. An example is granite, known for its durability and resistance to weathering, making it ideal for parts of...
Quarrying of Stone
One common method involves using a diamond belt saw to cut large blocks from the quarry face. These blocks can be about 50 feet long and 12 feet high. After the initial vertical cut, drilling is performed at the base of the...
Mortar Joint Deterioration in Masonry
The...
Non-destructive Tests for Concrete Strength