Design, Manufacturing, and Evaluation of Race and Automotive Prototypal Components Fabricated with Modified Carbon...

This study explores the enhancement of Carbon Fibre Reinforced Polymers (CFRPs) for automotive applications through the integration of modified carbon fibres (CF) and epoxy matrices. The research emphasizes the use of block copolymers (BCPs) and electropolymerisation techniques to improve mechanical properties and interfacial adhesion. Incorporating 2.5 wt.% D51N BCPs in the epoxy matrix led to a 64% increase in tensile strength and a 51.4% improvement in interlaminar fracture toughness. The electropolymerisation of CFs further enhanced interlaminar shear strength by 23.2%, reflecting a substantial enhancement in fibre-matrix interaction. A novel out-of-autoclave manufacturing process for an energy absorber prototype was developed, achieving significant reductions in production time and cost while maintaining performance. Compression tests demonstrated that the modified materials attained an energy absorption rate of 93.3 J/mm, comparable to traditional materials. These results suggest that the advanced materials and manufacturing processes presented in this study are promising for the development of lightweight, high-strength automotive components, meeting rigorous performance and safety standards. This research highlights the potential of these innovations to contribute significantly to the advancement of materials used in the automotive industry.