Novel sensorized additive manufacturing-based enlighted tooling concepts for aeronautical parts

This paper presents lightweight tooling concepts based on additive manufacturing, with the aim of developing advanced tooling systems as well as installing sensors for real-time monitoring and control during the anchoring and manufacturing of aeronautical parts. Leveraging additive manufacturing techniques in the production of tooling yields benefits in manufacturing flexibility and material usage. These concepts transform traditional tooling systems into active, intelligent tools, improving the manufacturing process and part quality. Integrated sensors measure variables such as displacement, humidity and temperature allowing data analysis and correlation with process quality variables such as accuracy errors, tolerances achieved and surface finish. In addition to sensor integration, additive manufacturing by directed energy arc and wire deposition (DED-arc) has been selected for part manufacturing. The research includes the mechanical characterisation of the material and the microstructure of the material once manufactured by DED-arc. Design for additive manufacturing" principles guide the design process to effectively exploit the capabilities of DED-arc. These turrets, equipped with sensors, allow real-time monitoring and control of turret deformation during clamping and manufacturing of aeronautical parts. As a first step, deformation monitoring is carried out within the defined tolerance of ± 0.15, which allows a control point to be established in the turret. Future analysis of the sensor data will allow correlations with process quality variables to be established. Remarkably, the optimised version of the turret after applying DED technology weighed only 2.2 kg, significantly lighter than the original 6 kg version. Additive manufacturing and the use of lightweight structures for fixture fabrication, followed by the addition of sensors, provide valuable information and control, improving process efficiency and part quality. This research contributes to the development of intelligent and efficient tool systems for aeronautical applications.