Preparation and antibacterial evaluation of silver-doped zirconia for enhanced dental restoration performance

Because of its superior strength, esthetic properties, and excellent biocompatibility, zirconia is preferred for dental prosthetic such as crowns and bridges. However, zirconia crowns and bridges are susceptible to secondary caries owing to margin leakage. Silver is a well-known antibacterial agent, making it a desirable additive to zirconia crowns and bridges for secondary caries prevention. This study focuses on imparting zirconia composite with antibacterial properties to enhance its protective capacity in dental restorations. We used the sol-gel method to dope Ag into zirconia. Silver-doped zirconia powders were prepared at Zr:Ag molar ratios of 100:0,100:0.1, 100:0.5, 100:1, 100:3, and 100:5 (respective samples denoted as Ag-0, Ag-0.1, Ag-0.5, Ag-1, Ag-3, and Ag-5) and were subjected to firing at various temperatures (400 °C-1000 °C). We performed x-ray diffraction to investigate the crystal phase of these powders and x-ray fluorescence and field emission scanning electron microscopy to analyze their elemental composition and surface morphology, respectively. Moreover, we performed spectrophotometry to determine theL*a*b* color values, conducted dissolution tests, and quantified the Ag content through inductively coupled plasma optical emission spectroscopy. In addition, we studied the antibacterial activity of the samples. Analyses of the samples fired at ⩽600 °C revealed a predominantly white to grayish-white coloration and a tetragonal crystal phase. Firing at ⩾700 °C resulted in gray or dark gray coloration and a monoclinic crystal phase. The Ag content decreased after firing at 900 °C or 1000 °C. Ag-0.5 and above exhibited antibacterial activity against bothEscherichia coliandStaphylococcus aureus. Therefore, the minimum effective silver-doped zirconia sample was found to be Ag-0.5. This study allows the exploration of the antimicrobial potential of silver-doped zirconia materials in dental applications such as prosthdontical lining materials, promoting the development of innovative restorations with protective capacity against secondary caries.