Simultaneous nitrification and denitrification in a hybrid activated sludge-membrane aerated biofilm reactor (H-MABR)...

There are a large number of simple landfills in hilly areas, and the results of previous studies have shown that pollutants in landfills can spread via interflow and cause surface source pollution. The hybrid activated sludge-membrane aerated bioreactor (H-MABR) developed in a previous study can be used for the treatment of interflow with a low chemical oxygen demand (COD)/total nitrogen (TN) ratio, and it has been shown to be effective in laboratory simulations. To investigate the effectiveness of the H-MABR in treating interflow around landfills in real-world applications, an in-situ pilot-scale evaluation of the effectiveness of H-MABR operation was conducted at a landfill. The results indicated that the removal efficiencies of COD, TN, and ammonia nitrogen in interflow by H-MABR were 87.1 ± 6.0%, 80.9 ± 7.9%, and 97.9 ± 1.4%, respectively. The removal rate of TN reached 148.6-205.6 g-N/m³·d. The concentration of each pollutant in the effluent was in accordance with China's "Standard for pollution control on the landfill site of municipal solid waste (GB16889-2008)," wherein the COD, TN, and ammonia nitrogen of effluent should be less than 100 mg/L, 40 mg/L, and 25 mg/L, respectively. The results of community composition analysis and PICRUSt analysis based on 16S rRNA gene sequencing showed that there were different dominant functional bacteria between the inner and outer rings, but functional genes involved in the nitrification-denitrification, assimilated nitrate reduction, and dissimilated nitrate reduction pathway were all detected. Furthermore, except for the nitrite oxidation gene narG, the abundance of which did not significantly differ between the inner and outer rings, the abundance of the other functional genes was higher in the outer ring than in the inner ring. An economic evaluation revealed that the operation cost of interflow treatment by the H-MABR was as low as ¥2.78/m³; thus, the H-MABR is a shock-load-resistant and cost-effective technology for interflow treatment.