Study on VOCs of Fishmeal during Storage Based on HS-SPME-GC-MS
Jie Geng1,2, Ke Nie1,2, Weixia Wang1,2
1College of Engineering, Huazhong Agricultural University, Wuhan 430070, China.
Abstract:
Fishmeal is widely used in the feed industry as the main protein material. The freshness grade directly affects the quality of the fishmeal. During the storage of fishmeal, the odor would change accordingly as the freshness grades decreased. To study the characteristic volatile organic compounds (VOCs) of fishmeal, stored at 25 °C and 80%RH with different freshness grades, headspace solid-phase microextraction combined with gas chromatography-mass spectrometry (HS-SPME-GC-MS) was used to analyze. The single-factor test was chosen for 50/30 μm divinylbenzene/carboxe/polydimethylsiloxane (DVB/CAR/PDMS) fiber. The equilibration time of 24 min, the extraction time of 60 min, the extraction temperature of 87 °C, and the addition of a saturated saline volume of 4 mL were determined by Box-Behnken design. There were 15 common VOCs detected during storage, the relative contents of acids increased significantly, ketones, aldehydes, esters, and nitrogen-containing compounds increased, and aromatic compounds and alcohols decreased. Combined with freshness indexes, volatile base nitrogen (VBN) and acid value (AV), hexadecanoic acid, tetradecanoic acid, methyl (Z)-N-hydroxybenzenecarboximidate, (Z)-hexadec-9-enoic acid, 6-ethoxy-2,2,4-trimethyl-3,4-dihydro-1H-quinoline, octadecanal, and [(Z)-octadec-9-enyl] acetate were determined as the characteristic VOCs based on the PLS-DA model. This study may provide data support for the development of fishmeal freshness-detecting instruments.
Related Concept Videos
High-Resolution Mass Spectrometry (HRMS)
Gas Chromatography–Mass Spectrometry (GC–MS)
A gas chromatograph consists of a long, narrow capillary column with a polysiloxane coating on the inner wall. The coating...
Sample Preparation for Analysis: Advanced Techniques
Acid digestion with strong acids is commonly used to dissolve inorganic materials that are insoluble (do not dissolve) in water. This method can be useful for...


