Designing an imaging spectrometer with high resolution using manufacturable gradient-index (MGRIN) lenses with a...

In this work, an imaging spectrometer with a diffraction-limited resolution of 0.043 nm is designed by using two manufacturable gradient-index (MGRIN) lenses with a linear refractive index distribution to suppress the aberrations. The MGRIN lenses are made from a combination of two separate base materials that their refractive indices are determined by the fractional composition of each base material at any point. The volume fraction of each base material in both lenses changes linearly from the front edge to the rear vertex of the lens. The input light to the spectrometer originates from a single-mode fiber with a core diameter of 9 μm and a numerical aperture of 0.1. The parallel rays after passing through the collimator are diffracted by a diffraction grating with a number of grooves of 1200 g/mm. The criteria determining the quality of the image show that the aberrations of the image have been optimally controlled. Comparing the results of this design with some similar studies done by other researchers shows that the root-mean-square radius of the spot diagram and Airy disk radius are significantly smaller than those designs. In addition, the modulation transfer function diagram has a better fit with the diffraction limit curve. These results make our proposed spectrometer have a stronger resolution than those in previous studies.