Related Experiment Video
Updated: Jun 17, 2025

Measuring Sub-23 Nanometer Real Driving Particle Number Emissions Using the Portable DownToTen Sampling System
Published on: May 22, 2020
Airborne particulate matter and diesel engine exhaust on infrastructure construction sites in the Copenhagen
Patrick L Ferree1, Merve Polat1, Jakob K Nøjgaard1
1The National Research Centre for the Working Environment, Lersø Parkallé 105, Copenhagen DK-2100, Denmark.
Abstract:
Diesel engine exhaust (DEE) is carcinogenic and potentially hazardous for those working in close proximity to diesel-powered machines. This study characterizes workplace exposure to DEE and its associated particulate matter (PM) during outdoor construction activities. We sampled at 4 construction sites in the Copenhagen metropolitan area. We used portable constant-flow pumps and quartz-fiber filters to quantify personal exposure to elemental carbon (EC), and used real-time instruments to collect activity-based information about particle number and size distribution, as well as black carbon (BC) concentration. Full-shift measurements of EC concentration ranged from < 0.3 to 6.4 µg/m3. Geometric mean (GM) EC exposure was highest for ground workers (3.4 µg/m3 EC; geometric standard deviation, GSD = 1.3), followed by drilling rig operators (2.6 µg/m3 EC; GSD = 1.4). Exposure for non-drilling-rig machine operators (1.2 µg/m3 EC; GSD = 2.9) did not differ significantly from background (0.9 µg/m3 EC; GSD = 1.7). The maximum 15-min moving average concentration of BC was 17 µg/m3, and the highest recorded peak concentration was 44 µg/m3. In numbers, the particle size distributions were dominated by ultrafine particles ascribed to DEE and occasional welding activities at the sites. The average total particle number concentrations (PNCs) measured in near-field and far-field positions across all worksites were 10,600 (GSD = 3.0) and 6,000 (GSD = 2.8)/cm3, respectively. Sites with active drilling rigs saw significantly higher average total PNCs at their near-field stations (13,600, 32,000, and 9,700/cm3; GSD = 2.4, 3.4, and 2.4) than sites without (4,700/cm3; GSD = 1.6). Overall, the DEE exposures at these outdoor construction sites were below current occupational exposure limits for EC (10 µg/m3 in Denmark; 50 µg/m3 in the European Union), but extended durations of exposure to the observed DEE levels may still be a health risk.
Related Concept Videos
Effects of Air-entrainment in Concrete
Deleterious Substances in Aggregate
Another type of impurity is clay and fine material that...
Chronic Obstructive Pulmonary Disease-I: Introduction
Chronic Obstructive Pulmonary Disease-II: Pathophysiology
Chronic Inflammation
Chronic Obstructive Pulmonary Disease
Smoking is a primary risk factor for COPD, with over 80% of patients having a history of it. Patients typically experience progressive dyspnea or labored breathing, frequent coughing, and recurrent pulmonary infections. Many eventually succumb to respiratory failure, characterized by...
Design Example: Sustainability in Concrete Building
There are multiple approaches to achieve sustainability in a commercial concrete building. For instance, construct a concrete parking area under the building, utilizing pervious concrete paver blocks in open areas to facilitate rainwater collection through an underground...

