Automated Droplet Ejection from a Digital Microfluidics Sample Pretreatment Device Enables Batch-Mode...

Digital microfluidics (DMF) features programmed manipulation of fluids in multiple steps, making it a valuable tool for sample pretreatment. However, the integration of sample pretreatment with its downstream reaction and detection requires transferring droplets from the DMF device to the outside world. To address this issue, the present study developed a modified DMF device that allows automated droplet ejection out of the chip, facilitated by a tailor-designed interface. A double-layered DMF microchip with an oil-filled medium was flipped over, with a liquid infusion port and a liquid expulsion port accommodated on the top working PCB plate and the bottom grounded ITO plate, respectively, to facilitate chip-to-world delivery of droplets. Using chemiluminescent immunoassay (CLIA) as an illustrative application, the sample pretreatment was programmed on the DMF device, and CLIA droplets were ejected from the chip for signal reading. In our workflow, CLIA droplets can be ejected from the DMF device through the chip-to-world interface, freeing up otherwise occupied electrodes for more sample pretreatment and enabling streamlined droplet microreactions and batch-mode operation for bioanalysis. Integrated with these interfacing portals, the DMF system achieved a single-channel throughput of 17 samples per hour, which can be further upscaled for more productive applications by parallelizing the DMF modules. The results of this study demonstrate that the droplet ejection function that is innovated in a DMF sample pretreatment microsystem can significantly improve analytical throughput, providing an approach to establishing an automated but decentralized biochemical sample preparation workstation for large-scale and continuous bioanalysis.