Waterborne Liquid-like Coatings with High Transparency, Superior Scratch Resistance, and Antismudge Properties

The aqueous formulation of antismudge coatings is a crucial step for environmental protection and pollution reduction. However, the inferior mechanical durability of waterborne antismudge coatings poses challenges for their practical application. Herein, we developed a fully waterborne antismudge coating with excellent scratch resistance by preparing hyperbranched amine-rich polysiloxane (HSP) for antismudge ability and epoxy-rich zirconium-based aqueous solution (ZAS) for mechanical performance. The former is obtained by combining SP, polydimethylsiloxane modified by 3-isocyanatopropyltriethoxysilane (IPTS), with 3-aminopropyltriethoxysilane (KH550), and the latter is synthesized using zirconium propoxide solution (TPOZ) with 3-glycidyloxypropyltrimethoxysilane (KH560). This report investigates the effects of the chain length and content of SP on the performance of the coating. The results indicate that the coating exhibits optimal comprehensive performance when the molecular weight of polydimethylsiloxane is 4.5 kDa, and the mass fraction of SP in HSP is 1.5%. The coating possesses high transparency similar to glass, good adhesion (≈3 MPa) to various substrates, high hardness (8H), flexibility (2.5 mm bending radius), and exceptional antismudge property. More importantly, the coating can still maintain excellent antismudge property even after enduring 400 cycles of abrasion with steel wool. Furthermore, the rapid enrichment of polydimethylsiloxane on the coating surface endows the coating with excellent lubrication ability, allowing most common liquid stains to slide off the coating surface. Moreover, the rewritability of the coating remains stable even after writing traces that have persisted on its surface for several weeks. This coating is anticipated to be utilized for protecting foldable electronic screens, vehicles, and other fields.