Effect of solution plasma process on microorganism sterilization, physicochemical properties and nutrients of milk
Haifeng Rong1, Yang Yu2, Baiqing Zhang1
1College of Food Science, Shenyang Agricultural University, Shenyang 110866, China.
Abstract:
Solution plasma process (SPP) was used for sterilizing Staphylococcus aureus (S. aureus) in raw milk (RM). The sterilization efficacy analysis and kinetics analysis showed bacterial concentration and the distance between electrodes were negatively correlated with the sterilization effect, while discharge voltage was positive. The better sterilization effect was achieved at 4 kV. The electrochemical indices analysis indicated that pH value of RM had no changed. The DO content decreased. The conductivity increased with the increasing discharge voltage. The nutrient content analysis revealed that the content of acidity, lactose, fat, and protein decreased. RM after SPP treatment exhibited higher values of sourness and slightly lower values of astringency than the control. The higher discharge voltage and narrower distance between electrodes presented the stronger effect. The structural characterization of CMs and MFGs was carried out using a laser particle sizer, FTIR, 1H NMR, XRD, and AFM. The results showed that the main chemical structure of CMs was unchanged basically. The SPP with the narrower distance between electrodes and lower discharge voltage significantly reduced the size and aggregation of MFGs at the molecular level. At 4 kV/2 mm, the particle sizes of CMs and MFGs were reduced from 238 nm and 523 nm to 224 nm and 302 nm, respectively. The average diameter of MFGs was reduced from 45 nm to 18 nm. Therefore, SPP is a potential method in the milk industry and provides a new idea for the preservation and processing of beverage.
More Related Videos
11:47Evaluation of the Efficacy of Organic Peroxyacids for Eradicating Dairy Biofilms Using an Approach Combining Static and Dynamic Methods
Published on: December 9, 2022
05:45Author Spotlight: Process Development for the Spray-Drying of Probiotic Bacteria and Evaluation of the Product Quality
Published on: April 7, 2023
Related Concept Videos
Methods of Sterilization I: Physical Methods
Steam sterilization uses non-toxic, low-cost moist heat in the form of saturated steam under pressure, which is fast, microbicidal, and sporicidal, and quickly warms and penetrates fabrics. Autoclaves, or steam sterilizers, expose each item to direct steam contact for a predetermined time at the necessary...
Methods of Sterilization II: Chemical Methods
Using chemical sterilization rather than heat to clean out equipment is recommended. It eradicates and removes all bacteria,...
Cleaning, Sterilization, and Disinfection
Cleaning
The cleaning process usually involves using water with detergents or enzymatic cleaner and removing foreign material from objects and surfaces, including organic material such as body fluids or inorganic material like soil. Cleaning is performed before high-level disinfection and sterilization because foreign materials on the cover of the devices interfere with process...
Surface Membrane Barriers
The outer layer of the skin, the epidermis, is a robust barrier comprising layers of closely packed keratinized cells. This dense arrangement prevents microbes from penetrating the body. The periodic shedding of epidermal cells...
