Related Experiment Video
Updated: Jun 17, 2025

Remote Laboratory Management: Respiratory Virus Diagnostics
Published on: April 6, 2019
Effective methods for the decontamination of healthcare waste: Ozone and UV-C radiation process
Alireza Mohtasebi1, Roghayeh Abedi Sarvestani1, Hossein Dabiri2
1Department of Environmental Health Engineering, School of Public Health and Safety, Shahid Beheshti University of Medical Sciences, Tehran, Iran.
Abstract:
Human-generated waste, including infectious healthcare waste, poses significant risks to public health and the environment. The COVID-19 pandemic has increased the global production of infectious waste, emphasizing the need for safe and sustainable waste management practices. While autoclaves are commonly used for on-site disposal, alternative methods like ozone gas and UV-C radiation offer environmentally friendly options that effectively eliminate pathogens without leaving toxic residues. Inadequate waste management can contribute to disease transmission, while open burning releases harmful pollutants. This study investigated the effectiveness of different disinfection agents - ozone gas and UV-C radiation - on infectious solid waste contaminated with bacteria. The bacterial indicators examined were Staphylococcus aureus, Bacillus subtilis, and Pseudomonas aeruginosa. The experimental methods included operating each ozone and UV-C radiation individually and simultaneously using ozone gas and UV-C radiation. The study also investigated exposure times and various concentrations of ozone gas. The findings demonstrated that the simultaneous application of ozone gas and UV-C radiation was the most effective method for decontaminating infectious solid waste and targeting the selected bacteria. The concentration of ozone gas ranged from 165 to 5000 ppm, depending on generation time and treatment chamber volume, while exposure times varied from 1 to 180 minutes. In applying UV-C rays, complete elimination of S. aureus was observed after 60 minutes up to 6-log, while the reduction of B. subtilis and P. aeruginosa were 2-log and 3-log, respectively. Ozone gas had the ability to inactivate all strains, but when ozone gas and UV-C rays were used simultaneously, this process was accelerated and improved. The total reduction in the bacterial load was 8-log. Considering the increase in population and the subsequent increase in waste generation, adopting an environmentally friendly waste management method can be very advantageous.Implications: This study highlights the effectiveness of simultaneously applying ozone gas and UV-C radiation for decontaminating infectious solid waste, offering an environmentally friendly alternative to traditional thermal treatments like autoclave and incineration. By optimizing ozone concentrations and exposure times, this method reduces disease transmission risks and minimizes environmental impact. These findings are crucial, especially during outbreaks such as the COVID-19 pandemic, providing scalable, sustainable waste management solutions for healthcare facilities. Implementing these techniques can protect public health and the environment, setting a new standard for safe infectious waste disposal worldwide, mitigating hazardous pollutants, and reduce the exposure risk of bio-hazardous residues.
More Related Videos
14:17The Portable Chemical Sterilizer PCS, D-FENS, and D-FEND ALL: Novel Chlorine Dioxide Decontamination Technologies for the Military
Published on: June 29, 2014
09:49Use of a Battery of Chemical and Ecotoxicological Methods for the Assessment of the Efficacy of Wastewater Treatment Processes to Remove Estrogenic Potency
Published on: September 11, 2016
Related Concept Videos
Methods of Sterilization II: Chemical Methods
Using chemical sterilization rather than heat to clean out equipment is recommended. It eradicates and removes all bacteria,...
Methods of Sterilization I: Physical Methods
Steam sterilization uses non-toxic, low-cost moist heat in the form of saturated steam under pressure, which is fast, microbicidal, and sporicidal, and quickly warms and penetrates fabrics. Autoclaves, or steam sterilizers, expose each item to direct steam contact for a predetermined time at the necessary...
Cleaning, Sterilization, and Disinfection
Cleaning
The cleaning process usually involves using water with detergents or enzymatic cleaner and removing foreign material from objects and surfaces, including organic material such as body fluids or inorganic material like soil. Cleaning is performed before high-level disinfection and sterilization because foreign materials on the cover of the devices interfere with process...
Hand hygiene
Hand washing...
Standard Precaution
Hand hygiene is the most crucial means to prevent the transmission of disease. Employers are legally required to provide their workers with personal protective equipment (PPE) to minimize exposure or contact with...
Healthcare Associated Infections II: Preventive Measures
The best practices for preventing healthcare-associated infections include hand hygiene, patient risk...