A Single-Camera-Based Three-Dimensional Velocity Field Measurement Method for Granular Media in Mass Finishing with...

Surface treatment processes such as mass finishing play a crucial role in enhancing the quality of machined parts across industries. However, accurate measurement of the velocity field of granular media in mass finishing presents significant challenges. Existing measurement methods suffer from issues such as complex and expensive equipment, limited to single-point measurements, interference with the flow field, and lack of universality in different scenarios. This study addresses these issues by proposing a single-camera-based method with deep learning to measure the three-dimensional velocity field of granular flow. We constructed a complete measurement system and analyzed the accuracy and performance of the proposed method by comparing the measurement results with those of the traditional DIC algorithm. The results show that the proposed method is very accurate in measuring spatial displacement, with an average error of less than 0.07 mm and a calculation speed that is 1291.67% of the traditional DIC algorithm under the same conditions. Additionally, experiments in a bowl-type vibratory finishing machine demonstrate the feasibility of the proposed method in capturing the three-dimensional flow of granular media. This research not only proposed a novel method for three-dimensional reconstruction and velocity field measurement using a single-color camera, but also demonstrated a way to combine deep learning with traditional optical techniques. It is of great significance to introduce deep learning to improve traditional optical techniques and apply them to practical engineering measurements.