Defect monitoring method for Al-CFRTP UFSW based on BWO-VMD-HHT and ResNet

Underwater friction stir welding (UFSW) achieves reliable joining between dissimilar materials and meets the welding demand for function and properties in lightweight structures of modern engineering. A defect monitoring method based on Variational Mode Decomposition optimized by Beluga Whale Optimization and Hilbert-Huang Transform (BWO-VMD-HHT) is proposed to solve the unclear feature of AE signal in UFSW due to the aqueous medium. UFSW experiments on Al alloy and carbon fiber reinforced thermoplastic (CFRTP) are carried out with AE signals measured. The time-frequency domain features of AE signals are extracted by BWO-VMD-HHT. The experimental results show that the main frequency of the AE signal is 22.5 kHz, and surface crack defects, shallow hole defects, and deep hole defects are accompanied by the transfer phenomena of different frequency components. Then, the feature vectors are built by frequency components in the BWO-VMD-HHT spectrum and reduced by principal component analysis, including 22.5 kHz, 24 kHz, 20.6 kHz, 18.4 kHz, 17.3 kHz, and 15.6 kHz. The feature vectors are divided into the train and test sets, and the welding defect prediction model (ResNet18-attention) is built by ResNet18 and trained by feature vectors. In the test set, the ResNet18-attention is compared with the BP, SVM, and RBF. Test results show that the precision of models has improved by at least 10%, which are trained by BWO-VMD-HHT features vector. Also, ResNet18-attention has achieved an average precision of 0.906 and recognizes the category of weld defect accurately, and this method can be applied to the defect monitoring of UFSW.